Flow Control Valves
- All valves are rated for 10.000 psi operating pressure
- All valves feature NPTF porting to insure against leakage at rated pressure
- All valves are painted, coated or plated for corrosion resistance
V-82: To control cylinder speed. Can also be used as shut-off valve for
temporary load holding. 3/8 NPTF female ports.
V-182: Same as V-82,
but with 1/4 NPTF female ports. Also suitable for gauge snubbing (also
V-8F: Like V-82, but with very fine metering for precise flow control.
Not recommended as shut-off valve.
V-9: Infinitely adjustable for metering oil out of a gauge to prevent
snapping of gauge pointer when load or pressure is suddenly
released. Also suitable as shut-off valve to protect the gauge during high
cycling applications. 1/2 NPTF male and female threads for use with GA-1,
GA-2 or GA-4 gauge adaptors.
Auto Damper Valve
V-10: To be used when gauge pressure must be monitored during high
cycle applications. Creates a flow resistance when load is released
suddenly. No adjustments are necessary. 1/2 NPTF male and female
threads for use with GA-1, GA-2 or GA-4 gauge adaptors.
V-17: Ruggedly built to resist shock and
operate with low pressure drop. Closes
smoothly without pounding. 3/8 NPTF female ports.
Pilot Operated Check Valve
V-42: Can be mounted at the cylinder to hold the load in case of system
pressure loss. Normally used with double acting cylinders where pilot port
receives pressure from a Tee-fitting in the cylinder retract line. 3/8 NPTF
female ports. Pilot pressure ratio 14% (6,5:1).
Manually operated check Valve
V-66: Used for load holding applications with
single and double acting cylinders. Valve is manually opened to allow oil
to flow back to tank when cylinder retracts. V-66F: Similar to V-66, but
with very fine metering capability for precise flow control.
Pressure Relief Valve
V-152: Limits pressure developed by the pump in hydraulic circuit, thus
limiting the force imposed on other components. Valve opens whenever
preset pressure is reached. To increase pressure setting, turn handle
- 0.9 m return line hose kit
- ±3% repeatability
- 55-700 bar adjustment range.
V-161: To control oil flow to a secondary circuit. Flow is blocked until
system pressure rises to the V-161 setting. When this pressure level is
reached, the V-161 opens to allow flow to the secondary circuit. A
pressure differential is always maintained between the primary and
Min. operating pressure: 140 bar